Router Rebooter
Router Rebooter Menus
∘ Factory Settings
This setup page allows for Factory Settings to be restored and saved into the device.
Load Factory Settings: Overwrite the existing configuration with factory settings. Current settings will not be recoverable. Note: Your Private Key will remain unchanged. A new Private Key can be created but should not be required under normal use (unless you believe there has been unauthorised access to this hardware or Private Key issues are occurring with Remote Management). The Private Key is not used unless you use Remote Management. If you require a new Private Key, please contact us for further instructions.
Slide switch and save changes to load Factory Settings.
⇦ HTTPS/Ping Checking Menu | Upload/Install Firmware Menu ⇨ |