Router Rebooter

Resetting Router, Modem Resetter

Uses

This device monitors up to four definable URLs and cycles power if unreachable (e.g. cycle the power on a router aka Resetting Router and/or NBN modem aka Modem Resetter). This device suits businesses that provide internet services to customers (e.g. to patrons, resorts/hotels, AirBNB etc), but do not want staff rectifying internet issues. There is also an optional feature to receive email notification whenever a device is down. The monitoring tool (website) allows a central group (such as an IT support business, department etc) to monitor several devices on behalf of others.

It is also suitable for home use, especially if you travel and need to remotely connect into your home network or access devices within (e.g. a surveillance camera), using a router type VPN and/or reduce the risk of inaccessibility whenever a device hangs and nobody is home to rectify the situation.

The RouterRebooter will then monitor internet connectivity and cycle power to the attached devices whenever connectivity is down.
This is the AU/NZ socket
Other sockets available by request:-
US, UK, CN, EU (DE/FR), IT, BR, CH, IL.



Main Features

  • 12 months return-to-base warranty with email support for setup (Australia based).
    Excludes misuse, overloading or shorting the device.
  • The ability to monitor up to four URLs with either HTTPS or Ping (or both) to test internet connectivity. Using multiple URL's reduces false triggering. A number of failed attempts can be configured (e.g. all four URLs need to be unreachable multiple times before cycling power).
  • The ability to monitor up to four devices using Ping. For example, a WiFi camera or any other device that times out on a ping request when unreachable, not be sensitive to cycling power.
  • Built on Sonoff S26 technology, reliable hardware with over 500,000 units in use.
  • Every device tested for Access Point and WiFi connectivity before shipment.

Other Features

  • Several configurable safeguards (e.g. multiple URLs/pings to check, multiple attempts allowed, maximum number of power cycles before monitoring stops etc).
  • Configurable Access Point including, SSID, Password, IP Address, Channel, Connections and Port.
  • Hardware resettable Access Point password (just in case you forget the password). This feature can be disabled.
  • Hardware resettable factory settings (just in case the Access Point configuration details are unknown). This feature can be disabled.
  • The ability to configure WiFi Access with using a Static IP address, Gateway etc.
  • The ability to configure the WiFi transmission method (e.g. 802.11b, 802.11g or 802.11n).
  • Ability to install new firmware.
  • Ability to perform a WiFi scan.
  • Reboot log to assist with technical issues and security.

Remote Management (Add-On)

  • Optional feature to purchase/add Remote Management.
  • Securely remote manage several devices under the same configurable Group Name.
  • The ability to send emails when monitored devices are not reachable (including weak WiFi signal, failing URL checking etc.)
  • The ability to reboot a device remotely (with or without cycling power).
  • Configurable remote management privileges to reduce risk.
  • The ability to record connectivity history and issues at troublesome location/s.

Specifications

  • Socket: US, UK, CN, AU, EU (DE/FR), IT, BR, CH, IL plug compatibility (subject to availability)
  • Power supply: 90V~250V AC(50/60Hz)
  • Max. Current: 10A
  • Max power: 2200W
  • Enclosure Material: Fire Retardant ABS
  • Wireless standard:802.11.b/g/n 2.4G WiFi
  • Encryption: WEP/TKIP/AES
  • Security Mechanism: WPA-PSK/WPA2-PSK
  • Operating Temperature: 0ºC-40ºC(32°F-104°F)
  • Operating Humidity: 5%-90%RH, Non-condensing
  • Product Dimensions: 104*55*73(mm)
  • IPv4, 2.4GHz WIFI compatible
  • Transmission range approx 10m (30ft) depending on obstructions/interference (WiFi Router and monitoring device [if not the WiFi Router] need to support this range).

Other

  • This device does not work with Siri, Alexa, eWeLink etc.
  • Designed for Home and Small Business use only (e.g. no high security, business critical and/or life support equipment reliance on network).
  • The Hardware Manufacturer and/or Firmware Developer will not be liable for any direct, indirect, consequential, incidental or special damages, including, without limitation, security breaches, lost revenues/profits, lost data, loss of wellbeing/life [e.g. monitoring medical/life support equipment], damage to other equipment as a result caused by this device.

Warning

  • Do not upgrade firmware on equipment whilst being monitored by this device. Damage may occur to monitored equipment (e.g. a router) if firmware is upgraded whilst connected to the Router Rebooter. A power cycle could be triggered, which could render the monitored equipment inoperable.